How to Start a Riding Lawn Mower

Would you like to know how to start a riding lawn mower? If you have just got one, you might not know what steps to follow before the key working in the ignition. The steps might to some extent differ between manufacturers but all of them pursue the similar crucial procedures.

Starting a riding lawn mower takes some time especially when the engine is cold. This is because it will need some more cranking time to get the fuel to the engine from the tank. Once you start the engine, it will be so easy to restart it next time you use the riding mower.

Always make sure that the starter does not crank for above 15 seconds at a point in time while you start a riding mower. Check out this riding lawn mower review.

Before starting the mower you need to first check a few things. These are:

  • Electric start troubleshooting

It is important to counter check the battery if you are using an electric mower. The machine depends on the battery, solenoid switch, and the starter to ignite. So you should ensure that the parts are in good condition to start the riding mower successfully.

  • Mower’s tank oil level

You should ensure that you check the level of oil before starting the engine. This is because if you start the engine when the oil level is low the machine can be damaged. Use a dipstick to check the level of oil.

  • Safety

A riding mower contains a safety switch. Issues related to safety are more common problems when it comes to starting a riding mower. In case you are not sitting on the mower’s seat firmly, the safety switch will turn the engine off. This will protect you in case you fall off the riding mower.

Steps on How to Start a Riding Mower

Here are some essential tips that will help you start a riding lawn mower.

  • Sit firmly on the seat

Some riding mowers come with a fitted security systems that shut off the mower’s engine in case you are not seated firmly or in case you employ the parking brake. Before you start the mower ensures you are seated appropriately and you can access all the pedals and levers comfortably.

  • Press the brake

Some mowers have a brake pedal on the left side of your foot while others have it as a lever you can get to by hand. Push the pedal or the lever downwards to employ the brake then hold it in place.

  • Employ the parking brake

Different models may have different positions of the parking brake. Look for a lever or a knob close to the seat either right or left side. Drag the brake upwards as you free the brake lever slowly. In case you riding mower does not contain a brake lever or knob, try pushing the brake pedal down like you are employing the parking brake.

  • Move the gear to neutral

Find the gear shift lever which is commonly close to the steering wheel or under the seat. Shift it until it points to N meaning it is neutral. For some mowers, you may be obligated to restrain the brake when you move the gears.

  • Position the throttle into a choke position

Locate the throttle lever usually situated next to the left side of the seat. The throttle denotes speed using a rabbit and turtle pictures. Move the lever to engage the choke. You can start the mower with a choke by placing the lever between the fast and slow settings. You can also pull it up past rapidly to a place designated by a ring with a transverse line across it.

  • Put in the key in the ignition

The ignition switch is situated on the dashboard in front of you or either beside the seat.

  • Turn the key to the right

Once the key is inside the ignition switch, rotate it to the right. You will hear the engine making some sounds meaning it is coming to life. You may be required to hold the key in place for more than 15 minutes until the engine fully begins. In case it fails to start, wait for about 10 seconds then restart again.

  • Move the throttle into the fast position

This is the final stage. Get back to the throttle and free the mower’s choke via moving the lever up to a quicker setting. It is mostly shown by an image of a rabbit.

The riding lawn mower is now ready to go. However, some outdated models might call for you to allow the engine to warm up before starting to drive.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.