How to Remove Shower Head without a Wrench

How do you feel when you get a cold shower during hot seasons and a warm shower during a cold season? The fact is that you feel so fresh after having a bath from a shower but not your big basin. Take some time to understand how it works.

A shower head is connected to the end of the water source. It regulates an easy distribution of water in a uniform motion while you are enjoying taking your cool or warm shower.

The water does not flow in an imaginary way, but it has a perforated overhead nozzle that drops the water from the shower. As time goes by, the shower head will need some repair due to some rust. They may close the perforated holes, or maybe it is old and needs a replacement.

Also, it is changed when it does not supply water correctly as intended. Do you know how to handle it without a wrench, which is powerful for turning or twisting an object?  Here are some ways to help you.

There are 5 main types of shower heads that you can find. They include wall mount shower heads- that are commonly used since they need low maintenance and offer different spray options of the water. Also, there are handheld showers -that are attached to a hose, thus allowing easy adjustment.

Body spray is mounted to the wall but with different body levels and rain shower heads that are directly attached to the shower ceiling leading to water flowing with different pressure depending on one's preference. This gives you an idea of having an upper hand to choose the best shower head that can suit you.

Remember to consider the shower head that is of high quality, durable, long-lasting, and the one that you can afford. Don't buy just because of its beautiful nature but consider the features mentioned above.

How to Remove a Shower head without Wrench 

To ensure that your shower head is in good condition, at times, you have to remove and clean it. Have you thought about doing that to your shower head? It is not a big deal.

Before removing the shower head, ensure the water supply is closed to avoid water being poured on you. This makes you not be disappointed while doing the activity.

The workplace should be clean and well covered. This is because; while working, you will use some chemicals. Some of the particles will fall into the shower. Therefore, cover the surface of the shower with a piece of cloth.

You can also use a sheet to enable you to notice anything that might fall. Remember, some of the chemicals may damage your surface, so prevention is better than buying other materials to repair your shower.

Using your hands- unscrewing the connection of the shower head and the shower pipe is simple. This is done by turning the shower head anticlockwise in order to soften it.

Use a wrapping cloth while twisting the shower head to avoid hurting your hand in either way. Later, you can remove the shower head and replace it with a new one or clean it, especially if it has some dirt.

Using vinegar-this is the easiest and effective way of removing shower head since it causes no harm while using it; since it dissolves the rust easily due to its acidic is mainly used when there is rust or mineral buildup.

After removing the shower head, pour some white distilled vinegar in the basin and soak the shower head overnight to allow the rust to soften. To ensure that all the rust is removed, scrub it with a brush to and rinse it clean with distilled water, then refit the shower head.

Spray rust penetrating oil- when you notice any rust, you spray the lime or WD-40 on the fitting of the shower head and the shower arm. Keep it covered with a wrapping cloth for about 15-20 minutes. This will loosen the shower head, and you will be able to remove it.

What if it's still stuck after that time? You can go ahead and spray more oil and try to twist the shower head. Do not do it will bare hands. Wrap a piece of cloth around the fitting of the head and turn it slowly to avoid gripping and scratching.

Clean the threads

This is done by using a good bathroom cleaner, for example, a wire brush or steel wool sponge to get into the grooves of the thread. Cleaning removes rust from both the shower holes and the fixation of the shower arm. After ensuring that it is clean, you can decide to return the original shower head or install a new one.

 After that, you can apply about 2-3 layers of the plumber`s tape in a clockwise direction to prevent leakage while fixing. You can later fix the shower head gently to the shower arm. Tighten it with your hands. Turn on the water tap in the bathroom for the shower to check if there is any leakage.

Or whether the shower holes supply water perfectly in case, there is any leakage. You can add more plumbers tape or tighten it again. Leave it for some time and turn on the showers to check it’s correctly fitted.


Have you found a solution to your problem? Let the plumber not be the first option or priority to rely on. Save the money and try doing it by yourself.

I hope that the steps mentioned and discussed above will be of great help to you. If you have the right information, you can easily remove a shower head without a wrench.

Nevertheless, there is more information on the internet that will also help you on how to remove your shower head without a wrench. Keep in mind that before starting any activity, the water tap is closed to avoid disappointments, overflow, and water wastage.

After cleaning, ensure that the shower head is well fitted to the shower arm to enjoy a warm or cold shower ahead.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.